1. #33

    If your toilet was installed before 1992, purchasing a WaterSense® labeled toilet can reduce the amount of water…

  2. #32

    Turn off the water while you brush your teeth and save up to 4 gallons a minute. That’s…

  3. #31

    Use a WaterSense® labeled showerhead. They’re inexpensive, easy to install, and can save you up to 750 gallons…

  4. #30

    If your toilet flapper doesn’t close properly after flushing, replace it.

  5. #29

    Upgrade older toilets with water-saving WaterSense® labeled models.

  6. #28

    When running a bath, plug the bathtub before turning on the water. Adjust the temperature as the tub…

  7. #27

    Put food coloring in your toilet tank. If it seeps into the bowl without flushing, there’s a leak….

  8. #26

    Toilet leaks can be silent! Be sure to test your toilet for leaks at least once a year.

  9. #25

    Time your shower to keep it under 5 minutes. You’ll save up to 1,000 gallons per month.

  10. #24

    Shorten your shower by a minute or two and you’ll save up to 150 gallons per month.

  11. #23

    If your shower fills a one-gallon bucket in less than 20 seconds, replace the showerhead with a WaterSense®…

  12. #22

    When buying a washer, check the Consortium for Energy Efficiency website to compare water use between models.